Although both manufactured by Industrial Test Systems, Inc., a US based company in South Carolina, the DPD-1 ReagentStrip and SenSafe Free Chlorine Water Check products test for free chlorine residual in very different ways.

The chart below will explain the differences and similarities between the two free chlorine residual test methods:

	DPD-1 ReagentStrips™	SenSafe™ Free Chlorine Water Check
Detects:	Free Chlorine Residual (and Other Oxidizers Normally Tested Using DPD-1 Chemistry)	Free Chlorine Residual
Test Procedure Overview:	Liberarting of DPD-1 Reagents Off Reagent Pads Into 10mL Sample and Checking Chlorine Concentration Visually by Color Comparator or Electronically Using a Colorimeter	Immersion of Test Strip in Water Sample, Removal of Test Strip After Specified Period of Time, and Visual Comparison of Developed Color in Test Area to a Color Chart
Detection Range:	0-6ppm	0-6ppm
Accuracy & Precision:	Depends on the Method Used to Interpret the Developed Color in the 10mL Sample. Visual Methods Will Have Less Precision Than Meters	0, 0.05, 0.1, 0.2, 0.4, 0.6, 0.8, 1.2, 1.5, 2, 2.6, 4, 6 ppm (mg/L)
Certifications & Compliance:	DPD Testing as Specified in 4500-CL G Check w/ Your Local Health Department for Final Word on Compliance	USEPA Approved Test Method for Free Chlorine Read the EPA Letter   View EPA Approved methods   Check w/ Your Local Health Department for Final Word on Compliance
Number of Tests:	100 Tests per Package	50 Tests per Package
Benefits:	Cleaner to Use Than DPD-1 Powders (i.e. DPD-1 Powder Pillows)   Dissolves Easier Than DPD-1 Tablets   Longer Shelf-Life Than DPD Liquid Reagents   No Undissolved Solids When Testing in Cold Water (5ºC)   Requires No MSDS	Safe for Use on Most Production Floors   Requires No Specialized Testing Knowledge   No Expensive Meter (Colorimeter)   Designed to Resist Monochloramine Interference   Requires No MSDS
Per Unit Cost:	$15.99 per Package of 100 Tests	$15.99 per Bottle of 50 Tests

As always, if monitoring free chlorine residual for reporting and/or compliance monitoring we suggest contacting your local health inspector before switching to a different chlorine testing method.

Although seemingly counter-intuitive, many methods approved on a Federal level may not have attained acceptance, yet, on a State or Local level.

In the water business testing for free chlorine happens quite frequently (as Scott just said)… and we know of two ways to make that task easier:

• DPD ReagentStrips — If you use DPD-1 to test for free chlorine residual, then undoubtedly you do so using DPD in powder or tablet form. Both methods work, but DPD-1 ReagentStrips make testing for free chlorine residual in water a faster and easier process while staying in compliance with 4500-CL G. Simply insert a DPD-1 ReagentStrip into a 10mL water sample, move it back and forth (liberated required DPD chemistry off of reagent pads), and read visually or with your favorite meter.
   
• SenSafe™ Free Chlorine Water Check — In the original recommendation letter from the USEPA, dated October 2003: “We believe that the ITS test strips will provide the regulatory community with a valuable option for monitoring free chlorine levels in drinking water.” This method bears USEPA Approval for in drinking water applications.

While both testing methods make free chlorine residual testing much easier without losing accuracy, we highly suggest check with your State and Local inspectors first before using either product for compliance monitoring… because as you know (probably better than we do!), sometimes State/Local regulation changes do not always keep up with Federal Regulation changes.

Not sure of the differences between the different DPD numbers? No worries! A while back we posted a pretty good article called What is DPD? that should answer the majority of your questions.

Getting back on topic, though, we have started carrying DPD # 1 Test Tablets and DPD # 3 Test Tablets in the DPD Test Reagent section of our Pool Water Test Kit Store. At this time we carry the Pentair brand.

Additionally, on this site we carry the DPD #1, #3 and #4 ReagentStrips in our Water Test Kit Store.

At this time we carry 100 packs of DPD-1, DPD-3 and DPD-4 in the Water Testing Blog Test Kit Store.

Differences between DPD-1, 3 and 4?

For the answer to that question, we suggest that you take a look back at one of our earlier postings called What is DPD?. Not to brag, but we think that article does a decent job of answering the question.

To sum things up, though, below you will find the most common uses for DPD-1, DPD-3 and DPD-4:

• DPD-1 — Used by itself in a water sample to determine the free chlorine concentration in the sample.

• DPD-3 — Used after DPD-1 in a water sample to determine the sample’s total chlorine concentration.

• DPD-4 — Used by itself in a water sample to determine the total chlorine concentration in the sample.

So, before purchasing DPD, you may want to verify the type of chlorine testing that you will need to do — else run the risk of accidentally purchasing the incorrect DPD reagent(s)!

Where to purchase DPD?

As we stated earlier, you can purchase 100-packs of DPD-1, DPD-3 and DPD-4 from our Water Test Kit Store.

As for where to find other forms of DPD reagents, at this time we know of places to purchase two other forms of DPD: tablets and powder.

Need a new meter to test chlorine levels, too? We suggest looking at the eXact Chlorine Photometer available on the FilterWater.Com web site. It offers the reliability of DPD-based chlorine testing and the convenience of not having to match colors against a color chart.

Want accurate chlorine test results but don’t want to deal with DPD reagents and meters? Take a look at the SenSafe Free Chlorine water Check product currently available in our Water Test Kit Store. It bears USEPA Approval for use in municipal water testing and offers superior resistance to monochloramine interference that can sometimes affect the results obtained when testing for free chlorine residual using DPD test reagents.

Today’s inquiry deals with DPD for free chlorine testing and came to us from ‘Oviruo’ who asked, “please can you assit me to get dpd satchet powdered type for testing free chlorine in water. thanks.”

We did a quick check and found that you can purchase DPD-1 Powder Pillows for Free Chlorine Testing on the Hach Company web site. The material has an approximate cost of around $21 per 100 powder pillows.

Alternative to powder pillows

A company called Industrial Test Systems came out with an alternative to the powder pillow that performs as well or better than the powder pillow. They called it the ReagentStrip and it works quite well without the mess that sometimes accompanies the act of trying to pour a small packet of DPD powder into a sample vial.

Below you will see how the DPD-1 ReagentStrip works when used with the Hach 890 Water Testing Meter:

Free Chlorine Testing Using DPD-1 ReagentStrip
and Hach’s 890 Water Testing Meter
click on image to view larger version

According to the manufacturer, DPD-1 ReagentStrips work with chlorine testing meters manufactured by well-respected companies such as Hach®, LaMotte®, Orion®, WTW®, and others.

Additionally, the DPD-1 free chlorine testing procedure stands and an equivalent to USEPA method 330.5 for wastewater and Standard Method 4500-Cl G for drinking water when used with a Palintest Chlorometer 1000 water testing meter or equivalent.

Cost of DPD-1 ReagentStrips compared to powder pillows

Earlier in this article we mentioned that interested parties can pick up 100 DPD-1 powder pillows for around $21 on Hach’s web site.

For those interested in the DPD-1 ReagentStrips, you can purchase 100 of those for around $19 on FilterWater.Com.

Dear Sir

Please could you quote a best price for: Chorine- DPD Free Reagent Qty:600 Pk, each pk containing 100 pillows

When testing for free chlorine most test methods use DPD-1 as the test reagent, though in the United States the USEPA has approved an alternate method (SenSafe Free Chlorine Water Check) for testing free chlorine levels in drinking water.

Where to Buy DPD-1 Test Reagents

We have found that online pool stores such as serve as very convenient place to purchase DPD-1 test reagents. As of right now, In the Swim has 1,000 DPD-1 tablets (for use in 10mL samples) available for less than 5 cents per test!

Easier to Use Form of DPD-1 Chlorine Test Reagent?

Looking for an equivalent but easier way to test free chlorine using your existing meter or test system that uses a 10mL sample size? If so, DPD-1 ReagentStrips function the same as or better than traditional DPD-1 test tablets, powders and liquids.

For a simple demonstration of how the DPD-1 ReagentStrips for free chlorine testing work in a Hach water quality testing meter, take a look at this free chlorine testing flowchart that illustrates how much easier DPD-1 ReagenetStrips make free chlorine testing.

“Do your DPD Chlorine tabs work in Hach equipment?”

Good afternoon, Ronda, and thank you for this inquiry. When weighing the different DPD options (tablets, powders, reagentstrips, etc.) make sure you note the sample size that each test method will work in. As a general rule most devices that use DPD as a reagent will have 10 mL sample sizes, but we have also seen devices that use 15 mL sample sizes, 7 mL sample sizes and 20 mL sample sizes.

Check your machine’s manual to find out what sample size it takes. In order to remain compliant with whatever drinking water directives you follow you will need to match up the sample size w/ the correct reagent amount.

Specifically, though, you asked about the DPD tablets for chlorine testing that we have shown on our site and as far as we know all of the DPD products we have shown on our site work for 10 mL samples — except for the eXact Micro DPD products which work in smaller samples.

Two 10-mL Tablets/Strips/Powders for a 20-mL Sample?

While in theory that would work, definitely check your approved testing method to see if it expressly forbids that sort of thing and/or if it specifically calls for a brand or type of chlorine reagent delivery method. In the past we have seen where testing protocols have gotten so granular that they call out not only the type of DPD used, but also the brand of the test meter and DPD used for chlorine testing.

(100) DPD #1 Tablets (1,000) DPD #1 Tablets

(100) DPD #3 Tablets (1,000) DPD #3 Tablets

]]> http://watertestingblog.com/2011/11/10/do-the-dpd-tablets-work-in-hach-meters/feed/ 0 http://watertestingblog.com/2011/02/06/inexpensive-meter-for-free-chlorine-testing/ http://watertestingblog.com/2011/02/06/inexpensive-meter-for-free-chlorine-testing/#respond Mon, 07 Feb 2011 00:05:15 +0000 http://watertestingblog.com/?p=3703 No matter how many ‘new’ and/or ‘innovative’ methods scientists devise to make water safe for drinking, we believe a certain faction in society will still put its trust in the sanitizing effects of free chlorine. This also means we believe a need for chlorine testing will always exist.

As an immediate example of this need, a Water Testing Blog reader named John recently asked,

“Hi, I am installing a 5000 litre water tank which i intend to add chlorine to and need an inexpensive free chlorine meter could you advise me on what to purchase as this is a new venture for me. Regards, John M.”

Thank you, John, for your question. We will begin by saying that you should immediately narrow your search by eliminating any water quality testing meters not using a form of DPD-1 as the reagent for free chlorine testing.

While ORP meters do offer a good bit of utility, their readings do not directly monitor just free chlorine content of water and a great number of water quality purists still feel that traditional DPD chemistry provides the best means of determining a sample’s relative safety — based solely upon the sample’s chlorine concentration, of course.

With that said, DPD comes in several forms: Liquids, Powders, Tablets, and ReagentStrips.

To answer John’s question directly, though, we suggest that he take a look at the eXact Micro 7+ Water Testing Meter. It offers quality chlorine testing capabilities and the option of testing for a host of other parameters, as well — if desired.

The basic test kit includes…

• 1 eXact® Micro 7+ Meter
• 1 bottle of eXact® Strip Micro DPD-1 (25 tests)
• 1 bottle of eXact® Strip Micro DPD-3 (25 tests)
• 1 bottle of eXact® Strip Micro pH (25 tests)
• 1 bottle of eXact® Strip Micro Total Alkalinity (25 tests)
• 1 bottle of eXact® Strip Micro Calcium Hardness (25 tests)
• 1 bottle of eXact® Strip Micro Copper (25 tests)
• 1 Mixing Cap
• 1 Cell Cleaning Brush
• 1 Instruction Booklet
• Plastic Carrying Case
• Four AAA Batteries to power the meter

What sort of detection range does the meter have? So glad you asked!

Naturally you will want to, or you should want to, know about the cost of replacement reagent(strips) for the meter. Since John asked about chlorine testing, below you will find links to, and pricing for, replacement DPD-1 and DPD-3 ReagentStrips — currently available at several online locations such as FiltersFast.Com and FilterWater.Com.

So if you find yourself in the market for a chlorine testing meter that uses an EPA Compliant testing method AND offers additional testing capabilities, definitely take a look at the line of eXact Micro 7+ Meters.

1,000 DPD #1 Tablets

Recently we received a request for a quote on 5,000 DPD #1 Tablets for chlorine (or possibly another oxidizer) level testing. We’d like to remind remind everyone that although we link to a number of water quality products, Water Testing Blog does not stock or sell any products.

The party asking about DPD #1 Tablets sought to import them into a foreign country so we suggested they contact companies on the following page:

( http://www.alibaba.com/showroom/dpd-tablets.html )

… so they could attempt to save a few bucks (or whatever currency they use) on shipping.

Now having said that, when it comes to DPD #1 we believe anyone thinking about using DPD tablets should at least consider using DPD-1 ReagentStrips in their place. ReagentStrips dissolve faster and easier than tablets (especially in hard or cold water) and contain no filler materials that could interfere with photometric optics.

As far as performance, the manufacturer of DPD-1 ReagentStrips, Industrial Test Systems, Inc., had an independent laboratory conduct a blind water sampling study using DPD ReagentStrips, Tablets and Powder Pillows. In the end the ReagentStrips tested as good, and in some cases better, than other DPD reagent delivery methods.

Hanna Checker HC
Chlorine Photometer

Every once in a while we get requests from foreign countries asking for pricing and availability of specific products.

Unfortunately we do not know a whole lot about the International market and what products exist in countries outside of the United States and Canada, but we generally assume that interested parties can acquire the same stuff we can, just at a higher cost due to import taxes and shipping fees.

Having said that, though, today’s international inquiry comes from ‘Zahid Afzal’ in Pakistan who asked who wants to know, specifically, about places to purchase a product called the Hanna Checker HC Photometer for Free Chlorine

Dear Sir/Madam,

Can you please give us the price for the “Hanna Checker HC Photometer for Free Chlorine” for our project in the Flood affected areas of Pakistan.

Regards,

Zahid Afzal

Thanks for the inquiry, Zahid. We really don’t know all that much about the “Hanna Checker HC Photometer for Free Chlorine“… except that a swimming pool supply company ( In the Swim ) began carrying this product at some point last Summer.

Having said that, do you really want to use a pool water testing device to test drinking water?

Granted we have said over and over again that doing ANY testing of drinking water in an area recently affected by flood waters makes more sense than performing no testing at all, but we would suggest looking into other meters… or possibly even into simpler testing methods that do not rely upon chemical reagents (i.e. DPD powders, DPD tablets, DPD reagentstrips, DPD liquids, etc.)