Since we posted one type of 20″ Big Blue Water Filter, we may as well continue with another type of 20-inch Big Blue filter. This time we have a list of replacement sediment filters from Liquatec, Aqua-Pure and Pentek that will fit into most standard 20″ Big Blue Filter Housings.

Aqua-Pure AP810-2 Whole House Rust Sediment Filter
Aqua-Pure AP810-2

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $43.00
Regular Price: $70.64

“The Aqua-Pure AP810-2 Whole House Rust Sediment Water Filter is a premium performance filter cartridge from Aqua-Pure. The AP810-2 fits Aqua-Pure whole house filter models AP802 AP802-1.5 filter housings. The AquaPure AP810-2 filter features Graded Density for longer life and is ideal for larger homes or commercial usage. The AP810-2 specifications: Micron Rating 5 Flow Rate 45 gpm Cartridge Dimensions: 19 7/8″ High x 4 5/8″ Diameter Filters Rust / Sediment ”

Aqua-Pure AP814-2 Rust, Dirt, Sediment Water Filte
Aqua-Pure AP814-2

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $55.99
Regular Price: $72.90

“The Aqua-Pure AP814-2 Rust Sediment Whole House Water Filter Cartridge fits the AP802, and the AP802-1.5 Whole House Water Filter Systems and as well as all brands of housings with the same size requirements. The AP814-2 composite wound water filter cartridge design allows large particles to be trapped on the outer surface while smaller particles are trapped closer to the core. This makes AquaPure AP814-2 water filters ideal for use if you have heavy dirt / sediment problems in your water. Aquapure AP814-2 whole house water filter specifications: Cartridge Dimensions: 19 7/8″ x 4 5/8″ OD Micron Rating 50 Flow Rate 45 gpm Recommended for Larger Households (3+ baths) or Commercial UseAquaPure AP814-2 water filters should be changed ever 12 months or after substantial pressure reduction. ”

Pentek DGD-2501-20 Dual Gradient Density Filter
Pentek DGD-2501-20

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $23.50
Regular Price: $25.60

“The Pentek DGD-2501-20 Dual Gradient Density Filter works as a pre and post filter all in one, eliminating the need for step-down filtration systems in your home. The outer layer of the DGD-2501-20 is a 25 micron pre-filter that takes out larger sediment, thus reducing the load on the 1 micron inner-layer post filter allowing it to operate more efficiently and consistently. The pure polypropylene construction of the DGD-2501-20 makes it resistant to chemicals and corrosion. Part number 155360-43. The Pentek DGD250120 Specifications:Reduces sand, dirt,silt, rust, scale particles 25 micron pre-filter/ 1 micron post filter Dimensions: 4 1/2″ x 20″ Capacity: 8,000 gallons Flow Rate: 20 GPM @ &lt 1 psi Temp Range: 40 -145 FThe DGD-2501-20 fits American Plumber, Pentek, US Filter, Culligan, Ametek 20″” heavy duty filter housings. Filter life varies depending on usage and water quality. View DGD-2501-20 Product Manual”

Pentek DGD-5005-20 Dual Gradient Density Filter
Pentek DGD-5005-20

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $21.00
Regular Price: $24.57

“Is the DGD-5005-20 Out of Stock? Try the Liquatec SDF-45-2005. The Pentek DGD-5005-20 Dual Gradient Density Filter works as a pre and post filter all in one, eliminating the need for step-down filtration systems in your home. The outer layer of the DGD-5005-20 is a 50 micron pre-filter that takes out larger sediment, thus reducing the load on the 5 micron inner-layer post filter allowing it to operate more efficiently and consistently. The pure polypropylene construction of the DGD-5005-20 makes it resistant to chemicals and corrosion. The Pentek DGD5005-20 Specifications:Reduces sand, dirt, silt, rust, scale particles 50 micron pre-filter/ 5 micron post filter Dimensions: 4 1/2″” x 20″” Capacity: 8,000 gallon filter Flow Rate: 20 GPM @ &lt 1 psi Temp Range: 40 – 145 FThe DGD-5005-20 fits American Plumber, Culligan, Pentek, Ametek and other 20″” Big Blue Housings. Filter life varies depending on usage and water quality. Pentek part number C155358-43, or 155358. View DGD-5005-20 Full Product Manual”

Pentek DGD-7525-20 Dual Gradient Density Filter
Pentek DGD-7525-20

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $24.50
Regular Price: $27.95

“The Pentek DGD-7525-20 Dual Gradient Density Filter works as a pre and post filter all in one, eliminating the need for step-down filtration systems in your home. The outer layer of the DGD-7525-20 is a 75 micron pre-filter that takes out larger sediment, thus reducing the load on the 25 micron inner-layer post filter allowing it to operate more efficiently and consistently. The pure polypropylene construction of the DGD-7525-20 makes it resistant to chemicals and corrosion. The Pentek DGD7525-20 Specifications:Reduces sand, dirt, silt, rust, scale particles 75 micron pre-filter/ 25 micron post filter Dimensions: 4 1/2″” x 20″” Capacity: 8,000 gallons Temp Range: 40 – 145 F Flow Rate: 20 GPM @ &lt 1 psiThe DGD-7525-20 fits American Plumber, Culligan, Pentek, Ametek and other 20″” Big Blue Housings. Filter life varies depending on usage and water quality. Pentek part number 155356-43. View the DGD-7525-20 Product Manual”

Pentek ECP1-20BB Sediment Filter
Pentek ECP1-20BB

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $26.99
Regular Price: $30.77

“The ECP1-20BB Sediment Filter is designed to provide higher flow rates while removing dirt and sediment from your water at high capacity. Made from cellulose and polyester this filter is recommended for use with chlorinated water only. Due to the ECP120BB design it is able to maintain low pressure drop. ECP Series cartridge end caps feature a color-coding system for easy identification of micron ratings: Tan (1-micron), White (5-micron), Blue (20-micron), Yellow (50-micron). The new ECP cartridges contain more media surface area than most competitive cartridges. The standard 10″” ECP cartridges contain six square feet of media, where most cartridges contain only 4.5 square feet. Part number 255493.The ECP1-20 BB specifications: Micron Rating 1 Flow Rate: 20 GPM @ &lt 1 psi Dimensions: 20″” Long x 4 1/2″” Diameter Temp Range: 40 – 125 F Reduces Sand, Dirt, Rust, and Sediment ParticlesThe ECP1-20BB fits the Culligan / Ametek / Pentek 20″” Big Blue filter housing as well as other 20″” standard size large housings. View Product Manual”

Ametek, Pentek R30-20BB 20″ Big Blue Water Filter
Pentek R30-20BB

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $30.00
Regular Price: $34.69

“The Pentek R30-20BB Heavy Duty Filter Cartridge Pleated Polyester Cartridge is a whole house filter designed to filter sand, dirt, silt, rust, and scale particles. Because of the R30-20BB’s high dirt-holding capacity this filter is ideal for use with well-water. This filter is the double-length R30-20BB, R3020BBby American Plumber, Ametek, Culligan, US Filter, Pentek. Also replaces Keystone GPE30-20 filter. Part number 155430. The R30-20BB specifications:30 Micron Rating reduces sand, dirt,silt, rust, scale particles 4 1/2″ x 20″ cartridge 24,000 gallon filter capacity Flow Rate : up to 20 gallons per minute resistant to chemical and bacterial attack Temp Range: 40 – 125 psiThe R30-20BB needs to be changed every 6 months or when water pressure significantly decreases. View the Full Product Specifications”

Liquatec SDF-45-2050 Sediment Filter
Liquatec SDF-45-2050

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $20.00
Regular Price: $29.65

“The SDF-45-2050 Sediment Filter is a 4 stage polypropylene sediment filter with a high dirty holding capacity from Liquatec. The SDF452050 is economically priced and comparable to the Pentek DGD Series.The SDF-45-2050 is constructed to the below specifications going from outside to inside: 1st Stage: 100 Micron2nd Stage: 75 Micron3rd Stage: 50 Micron4th Stage: 50 MicronThe SDF45-2050 features high efficiency and low pressure drop. This filter is NSF/ANSI tested for material requirements only. The SDF-45-2050 Specifications: Micron Rating : 100-50 Dimensions: 4.5″ x 20″ Flow Rate: up to 20 GPMThe SDF-45-2050 should be changed every 6 months to 1 year depending on water quality and usage. Product Specifications”

Pentek WP1BB20P String Wound Polypropylene Filter
Pentek WP1BB20P

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $38.00
Regular Price: $45.03

“The Pentek, Ametek WP1BB20P String Wound Polypropylene Filter is the affordable solution for reducing fine sand, dirt, rust, scale, and sediment particles from your water.This filter is constructed of durable polypropylene string that is wound tightly around a solid polypropylene core for maximum efficiency and filtration. Part number 355222. The WP1BB20P specifications: Micron Rating 1 Flow Rate up to30 GPM Cartridge Dimensions: 20″ High x 4 1/2″ Diameter reduces extra fine sand, dirt, silt, scale, rust, and sediment particles The WP1BB20P fits the Culligan / Ametek / Pentek and other brand Big Blue 20″ housings. Filter life depends on water quality and usage. If you see a significant drop in pressure you should change your cartridge. ”

Pentek WP25BB20P String Wound PolyPropylene Filter
Pentek WP25BB20P

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $35.00
Regular Price: $40.95

“The Pentek / Ametek WP25BB20P String Wound PolyPropylene Filter is the affordable solution for reducing sand, dirt, rust, scale, and sediment particles from your water. This filter is constructed of durable polypropylene string that is wound tightly around a solid polypropylene core for maximum efficiency and filtration. The WP25BB-20P specifications: Micron Rating 25 Flow Rate up to 20 GPM Cartridge Dimensions: 20″ High x 4 1/2″ Diameter reduces sand, dirt, silt, scale, rust, and sediment particles The WP25BB20P fits the Culligan / Ametek / Pentek and other brand 20″ housings. Filter life depends on water quality and usage. If you see a significant drop in pressure you should change your cartridge. ”

Pentek WP5BB20P String Wound PolyPropylene Filter
Pentek WP5BB20P

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $37.00
Regular Price: $41.53

“The Pentek / Ametek WP5BB20P String Wound PolyPropylene Filter is the affordable solution for reducing sand, dirt, rust, scale, and sediment particles from your water. This filter is constructed of durable polypropylene string that is wound tightly around a solid polypropylene core for maximum efficiency and filtration. The WP5BB20-P specifications: Micron Rating 5 Flow Rate up to40 GPM Cartridge Dimensions: 20″Long x 4 1/2″ Diameter reduces sand, dirt, silt, scale, rust, and sediment particlesThe WP5BB20P fits the Culligan / Ametek / Pentek and other brand 10″ housings. Filter life depends on water quality and usage. If you see a significant drop in pressure you should change your cartridge. ”

Liquatec SDF-45-2001 Sediment Filter
Liquatec SDF-45-2001

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $22.00
Regular Price: $29.65

“The SDF-45-2001 Sediment Filter is a 4 stage polypropylene sediment filter with a high dirty holding capacity from Liquatec. The SDF452001 is economically priced and comparable to the Pentek DGD-2501-20. The SDF-45-2001 is constructed to the below specifications going from outside to inside: 1st Stage: 25 Micron2nd Stage: 10 Micron3rd Stage: 5 Micron4th Stage: 1 MicronThe SDF-45-2001 features high efficiency and low pressure drop. This filter is NSF/ANSI tested for material requirements only. The SDF-45-2001 Specifications: Micron Rating : 25-1 Dimensions: 4.5″ x 20″ Flow Rate: 1 psi @ 20 GPM Temp Range: 40 – 145 FThe SDF-45-2001 should be changed every 6 months to 1 year depending on water quality and usage. Product Specifications”

Liquatec SDF-45-2005 Sediment Filter
Liquatec SDF-45-2005

WaterTestBlog.Com -- Drinking Water Filters, Test Kits and Information!

Your Cost: $21.00
Regular Price: $29.65

“The SDF-45-2005 Sediment Filter is a 4 stage polypropylene sediment filter with a high dirt holding capacity from Liquatec. The SDF452005 is economically priced and fits most 20″ Big Blue Housings. Compare to the Pentek DGD-5005-20. The SDF-45-2005 is constructed to the below specifications going from outside to inside: 1st Stage: 50 Micron2nd Stage: 25 Micron3rd Stage: 10 Micron4th Stage: 5 MicronThe SDF-45-2005 features high efficiency and low pressure drop. This filter is NSF/ANSI tested for material requirements only. The SDF-45-2005 Specifications: Micron Rating : 50-5 Dimensions: 4.5″ x 20″ Flow Rate: 1 psi @ 20 GPM Temp Range: 40 – 145 FThe SDF-45-2005 should be changed every 6 months to 1 year depending on water quality and usage. Product Specifications”