An ex-employee at an asphalt company has come forward recently with allegations that higher-ups in the company encouraged him to submit fake water samples (taken from a rainwater collection bucket) and submit them for testing by the Oregon Department of Transportation… because the higher-ups feared actual testing of their waste water stream would reveal code violations.

Nothing makes the taste of fresh, clean drinking water vanish quite like… runoff from an asphalt plant, right? Even just saying that to ourselves as we put together this blog posting turned our stomachs.

So, if unlike ourselves you actually believe all of required environmental testing gets done in the proper manner, perhaps now you will see things a bit differently and start testing your water on, at the very least, a semi-regular basis?

Think we made up this story? Not! Read the source article here.

Common water contaminants to test for?

Although far more sinister compounds and elements exist in our world that could enter our water supply (i.e. organic solvents, radioactive isotopes, etc.), we routinely suggest testing for heavy metals as a good starting point because whether you have city/municipal water or your water comes from a well or spring, metals can pretty much always — under the right circumstances — find a way into the water supply.

• Well casings typically get made out of metal.

• City/Municipal water must travel through miles of metal piping before it gets to one’s residence.

• Water extracted from wells comes in contact with rocks and soil that all contain traces of metals.

• While most homes these days contain plastic plumbing, many older homes still contain metallic plumbing (copper w/ lead-laced solder at the joints) plumbing… and metal lines get used to connect most homes (regardless of age) to the municipal water system.

What should I test for next?

After dissolved metals in water testing things get a bit murky. Pardon the expression.

Folks with well water may want to test for all sorts of things such as nitrates, nitrites, coliform bacteria (important!), hydrogen sulfide, arsenic, etc. while folks on city water may want to test for specific metals such as copper and lead, total hardness, free chlorine, total chlorine, etc.

No matter what type of water you have going into your home, school or place of business, only regular testing of the water’s quality will let you know if you have anything to worry about when it comes to the safety and purity of the water you drink.

While the Iowa Department of Natural Resources says they do not believe any dangerous water safety issues avoided detection, the fact that a city employee responsible for testing the city’s public drinking water supply on a regular basis purchased only enough supplies for 100 tests — despite claiming to have performed 3,889 water tests between January 2006 and July 2009 — would make just about anyone curious.

A former Edgewood city employee has been sentenced to probation after he admitted that he failed to test the town’s water supply and submitted false reports to the Iowa Department of Natural Resources.

…

Harris, 43, pleaded guilty in April to one count of making false statements in a matter within the jurisdiction of the Environmental Protection Agency.

In the plea agreement, Harris admitted he sent false monthly reports to the DNR from February 2008 and July 2009. He falsely claimed testing for fluoride, chlorine and manganese. DNR tests showed less chlorine in the water than the 1.5 milligrams per liter required by state law to kill bacteria.

The review found lower-than-acceptable levels of fluoride, which reduces tooth decay, and manganese oxide, which helps remove cancer-causing radium from the water. Residents in the eastern Iowa town were not exposed to any short- or long-term health risks, a DNR officer said.

The DNR originally alleged that Harris claimed to have done 3,889 water tests between January 2006 and July 2009, but bought enough material for only 100 tests. Harris resigned in August 2009.

The investigation began after some residents complained about declining water quality. ( source )

OK, now having read that, does the statement, “DNR tests showed less chlorine in the water than the 1.5 milligrams per liter required by state law to kill bacteria.” make you feel… safe?

How about “The investigation began after some residents complained about declining water quality.” Does that give you any sense of security?

Can individuals test their city/town/tap water?

Of course they can! While only certified water testing laboratories can give the absolute last word on the safety and potability of drinking water, at-home drinking water test kits from companies like SenSafe and WaterSafe allow the average homeowner to test critical water parameters on their own, whenever they want, and for little money.

What water parameters should homeowners test?

Given the number of possible drinking water contaminants, the average homeowner would find it difficult (and expensive!) to test for them all… but as a general rule, if typically makes sense for people on city/town/tap water to test for water parameters such as:

• free chlorine residual
• total chlorine residual
• lead in water
• copper in water
• iron in water
• total hardness
• bacteria in water
• hydrogen sulfide

Should homeowners with city water test for other things? That all depends on where their water company gets its water. As an example, if the water comes from a well, other potentially harmful water contaminants such as pesticides and arsenic could find their way into the water supply and an ill-equipped water treatment facility may not have the proper technology installed to remove them.

As always, though, if you have serious reason to suspect that your tap water has ‘issues’, seek advice from certified water quality experts. Home water test kits serve as great field tests, but the final word regarding a water supply’s potability should come from a certified water testing laboratory.

The Illinois attorney general filed suit June 9 against the village of Crestwood, several officials and the village’s former certified water supply operator for allegedly using a contaminated well and knowingly providing false information about the water supply to residents and state regulators.

The nine-count complaint, filed in the Cook County Circuit Court, charges that Crestwood officials became aware in late 1985 that one of the village’s wells was contaminated with volatile organic chemicals, including vinyl chloride and dichloroethylene.

Despite this knowledge, village officials continued adding the contaminated water to the public water supply until 2007, the lawsuit says.

During this time, Crestwood officials assured residents and the Illinois Environmental Protection Agency that the village’s only supply of water was Lake Michigan and water purchased from another nearby Chicago suburb, the complaint says. ( source )

We feel this article should give people MORE than enough reason to keep a watchful eye on the quality of their drinking water. It saddens all of us at Water Testing Blog to think that government officials would commit such crimes against the very people that elected them, but power and greed can can make people do a lot of very bad things.

You can easily keep tabs on your local water authority by calling them up and asking for a copy of the most recent water quality report. To verify the accuracy of the report’s contents in a simple manner you can use a kit like such as the WaterSafe Drinking Water Test Kit or the Water Quality Test Kit from Industrial Test Systems.

Please note, though, that if you suspect a serious or potentially life-threatening problem with your water at ANY time you should have a thorough water analysis performed by a certified water testing laboratory.