Farmers in the region contended with devastating droughts last year which caused corn crops to struggle in the sun drenched, hard arid soil. Since the crops did not develop like usual, they therefore did not soak up as much of the nitrates (from fertilizer) as they normally would and the excess sat on the ground until record-breaking and near record-breaking periods of rainfall this Spring.

Now everyone in the region has their eye on nitrate levels in the major rivers which, if allowed to get too high, could cause a whole lot of drinking water contamination problems for around 45% of Iowa residents… because many municipalities in Iowa draw their drinking water from bodies of surface water.

As an example of how elevated nitrate levels have already started to affect people besides farmers, one municipality has recently re-activated a very expensive nitrate removal system that costs an estimated $7,000 per day to operate. That extra $7k a day in expenses naturally will get passed on to customers and cause a spike in their water bills.

Why do corn fields contain so many nitrates?

According to what we have read, growing corn properly requires the use of more nitrogen rich fertilizer than a lot of other crops. Therefore, if a growing season’s corn crop does not consume all of the nutrients farmers put down, it sits in the soil waiting for next year’s planting season or a good, heavy rain to wash it away.

Nitrates a danger to humans?

In the past we wrote about a condition known as Blue Baby Syndrome which you can read about in an article called Testing for Nitrates Drinking Water. For those not interested in reading the article, we will sum up the takeaway points for you:

• Experts believe nitrates may hinder the ability of a baby’s body to properly carry oxygen in the bloodstream. By baby we mean an infant up to roughly six months of age.
   
• Health officials warn pregnant women not to consume water containing nitrate levels 10 mg/L (ppm) or higher.
   
• Medical professionals warn parents and caregivers against preparing formula bottles using water that contains nitrate levels 10 mg/L (ppm) or higher.

Now that you know nitrates in drinking water can cause health problems and that the US Environmental Protection Agency has set the MCL (Maximum Contaminant Level) for nitrates in drinking water at 10 mg/L (ppm), you may find yourself asking, “How can I test for nitrates in my water?”

Testing for nitrates in drinking water

In agricultural areas and after regional flooding we have seen a number of cases where local health departments have offered free or reduced rate nitrate testing as well as testing for other critical water quality parameters like coliform bacteria. We suggest contacting your local health department to see if they have any discounted water testing programs available.

If no such programs exist in your area, you can always perform nitrate testing on your own using products like the WaterWorks Nitrate & Nitrite Test Strips which provide fast, accurate on-the-spot water test results… and don’t cost a small fortune.

On the complete opposite end of the expense spectrum you could have your water tested by a certified water testing lab by mail. National Testing Laboratories offers a well water testing package called Well-Check that includes tests for bacteria (total coliform and e-coli), 19 heavy metals and minerals (including lead, arsenic and mercury), 6 inorganic chemicals (including nitrates and fluoride) and 5 physical factors (including pH and hardness). Test results typically get emailed to customers within 10 to 14 days.

Removing or reducing nitrates in drinking water?

Should you have the misfortune of finding out you have elevated levels of nitrates in your drinking water you will more than likely want to reduce those levels. For that you will need a water filtration system. While selecting a water filter make certain you read through the list of contaminants that each filter takes out because not all drinking water filters currently on the market will remove nitrates.

Below you will find several models of water filters that WILL help reduce nitrate levels in well water, tap water, city water, surface water, etc. The models below range from a simple disposable counter top model for nitrate removal all the way up to a whole house filter for nitrate removal.

As an example, the rise and fall of aquifer levels in certain parts of the United States can have a pronounced effect on dissolved arsenic levels in the water contained in those aquifers.

As a second example, water from melting snows or from Spring showers traveling across the land in agricultural regions has a tendency to pick up potentially harmful bacteria and nitrates/nitrites that could work their way into poorly capped wells.

Other unwanted drinking water contaminants such as atrazine and simazine also get picked up runoff water making its way through the countryside. As you may recall, farmers in the United States used both of those compounds, especially atrazine, as an herbicide/pesticide for many years — and therefore it ought not surprise you that pockets of washed away atrazine lurk in many unsuspecting parts of the country.

Nitrate & Nitrite Test Strips

We have posted a number of articles about nitrates in drinking water and given a number of links to products that can remove nitrates from drinking water… and today we found out that FilterWater.Com has started carrying a highly effective nitrate removal system made by Crystal Quest that costs less than $150, features a dual filter system containing a total of 7 filtration stages, and qualifies for free shipping.

Do I have nitrates in my drinking water?

Nitrates occur naturally in the environment and may come from any number of sources in nature including, but not limited to, animal waste that filters down into the aquifer. Wells tapping into that aquifer as a source of drinking water then pull the water to the surface where it gets used by the well owner for cooking, drinking, bathing, etc.

• Testing for Nitrates in Drinking Water
  – includes a simple explanation of Blue Baby Syndrome
• Springtime Testing of Well Water in Farming Community?
• Simple Test for Nitrates and Nitrites in Water

• Nitrates in Well Water / Private Well Testing

What harm can nitrates in drinking water do?

The USEPA summed up the effects of nitrates in drinking in the following ways:

“Short-term: Excessive levels of nitrate in drinking water have caused serious illness and sometimes death. The serious illness in infants is due to the conversion of nitrate to nitrite by the body, which can interfere with the oxygen-carrying capacity of the child’s blood. This can be an acute condition in which health deteriorates rapidly over a period of days. Symptoms include shortness of breath and blueness of the skin.” ( source )

“Long-term: Nitrates and nitrites have the potential to cause the following effects from a lifetime exposure at levels above the MCL: diuresis, increased starchy deposits and hemorrhaging of the spleen.” ( source )

How can I get rid of nitrates in my water?

We started this posting by saying that Filter Water now carries a dual filter counter top nitrate removal system… so now we figure we ought to tell you a little more about it.

Stage 1 — This product uses as dedicated nitrate removal filter. Water first flows through a nitrate-selective resin cartridge designed to reduce nitrate levels in water by 90 to 95 percent. The cartridge has an expected nitrate capacity of approximately 5500 ppm and owners can regenerate (aka: recharge, flush out, clean) the cartridge using a sodium chloride brine solution when it gets full.

Stages 2 & 7 — Pre and post one-micron filter pads remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other undissolved matter in the water.

Stages 3 & 4 — Specially formulated beds of copper and zinc (KDF-55D, and KDF-85D) use a process known as oxidation-reduction to exhaust any chlorine in the water and convert iron and hydrogen sulfide into insoluble matter which attaches to the surface of the media. Heavy metals such as lead, mercury, copper, nickel, chromium, cadmium, aluminum, etc. also get removed during stages 3 & 4.

Stage 5 — Ion exchange resins reduce heavy metals such as lead, copper and aluminum further and also reduce water hardness by filtering out magnesium and calcium.

Stage 6 — Granulated Activated Carbon (GAC), a universally recognized and widely used adsorbent for a wide variety of unwanted drinking water contaminants such as chlorine (99.9%), chemicals linked to cancer (i.e. THM’s, benzene) pesticides & herbicides such as atrazine and simazine, insecticides, volatile organic compounds (VOC’s), PCB’s, MTBE’s and hundreds of other chemical contaminants which could possibly exist in your water supply.

Other features of the Dual Filter Nitrate Removal System?

Many people simply do not want to mess around with plumbing under their sink so a unit like the Crystal Quest Dual Filter Nitrate Filter System which requires no plumbing will work out beautifully.

The unit sits quietly next to the sink on the counter top and connects easily to pretty much any standard kitchen faucet. It also comes with a diverter valve which allows people to switch between filtered and unfiltered water with the flip of a switch.

Not digging the stark white appearance of the filter? Don’t worry! You have the option of ordering the unit with a chrome finish if that better suits the decor of your kitchen.

How long will the filters last and what do replacements cost?

The manufacturer estimates that the filters ought to last between 1 and 3 years depending upon the initial quality of source water. Keep in mind, though, that a soaking of the nitrate-specific cartridge in sodium or potassium chloride solution at room temperature will recharge the cartridge for additional use.

1. Remove cartridge from unit
2. Immerse the cartridge in a sodium or potassium chloride and room temperature water for a period of 30 minutes
3. Rinse off and then soak the cartridge for 30 minutes in salt-free water
4. Shake excess water off of and out of the cartridge
5. Place the cartridge back in the filter housing
6. Run through the systems for a period of 5-10 minutes

When it comes time to replace the nitrate-specific filter cartridge it will cost around $50 and the 6-stage filter cartridge will cost about the same.

The article went on to warn that homeowners with septic systems located too close to wells have a greater risk of contamination, but that malfunctioning septic systems, regardless of proximity to the well, can still leach nitrates into the aquifers which provide water to wells not located too close to septic systems.

Owners of private wells, as noted in the article, do NOT have to test their wells with any frequency. No laws or regulations exist that force private well testing and as a result, many private well owners do not test their well water unless a specific problem develops — and usually that problem comes in the form of an unexplainable illness illness in the family or a sudden(?) malfunctioning of their well equipment.

Dangers of Nitrates in Drinking Water?

The United States Environmental Protection Agency states the following with regard to the dangers of nitrates in drinking water:

“Short-term: Excessive levels of nitrate in drinking water have caused serious illness and sometimes death. The serious illness in infants is due to the conversion of nitrate to nitrite by the body, which can interfere with the oxygen-carrying capacity of the child’s blood. This can be an acute condition in which health deteriorates rapidly over a period of days. Symptoms include shortness of breath and blueness of the skin.” ( source )

“Long-term: Nitrates and nitrites have the potential to cause the following effects from a lifetime exposure at levels above the MCL: diuresis, increased starchy deposits and hemorrhaging of the spleen.” ( source )

Testing for Nitrates?

First of all, the Maximum Contaminant Level for Nitrates (as Nitrogen) in drinking water is 10.0 ppm (mg/L). This means water distributed for human consumption from ANY source should not contain more than 10.0 ppm (mg/L) of Nitrates (measured as Nitrogen).

Well owners, or pretty much anyone who wants to test for Nitrates can use a simple Nitrate Test Strips for that purpose and get accurate test results in just over a minute. This product also gives a reading for Nitrites, which also pose a health risk to humans. The Maximum Contaminant Level for Nitrites (as Nitrogen) in drinking water is 1.0 ppm (mg/L)