pool filter – Water Testing Blog & Water Test Kit Store http://watertestingblog.com "It's your water, your health.. and ultimately your LIFE!" Thu, 30 Dec 2021 07:33:30 +0000 en-US hourly 1 https://wordpress.org/?v=4.7.5 What is Diatomaceous Earth? http://watertestingblog.com/2011/07/13/what-is-diatomaceous-earth/ http://watertestingblog.com/2011/07/13/what-is-diatomaceous-earth/#respond Wed, 13 Jul 2011 13:03:50 +0000 http://pool-water-testing.com/pool-testing-blog/?p=738 Rather than go into a (boring) chemistry lesson we will address the reason WHY so many of you have asked us this question: You want to know what it is because the pool guys left a bag of suspicious looking white powder at your house and didn’t tell you why.

DE (Diatomaceous Earth) Pool Filters

While many swimming pool filters use just sand as their primary filtration media, a good number of other pool filters use cloth-like filters covered in diatomaceous earth to filter pool water. The DE powder filters out particles far smaller than sand can remove and the cloth-like material over plastic framework stops large particles and debris from getting through.

Proper Use/Addition of Diatomaceous Earth

First and foremost, consult the manual that came with your filter system to make sure you actually HAVE a DE filter. Then, while you have the manual out, read the sections about starting a DE filter, backwashing a DE filter and cleaning a DE filter. Taking a few minutes right then and there to learn the correct way to care for YOUR filter system will save you innumerable headaches — and possibly a huge amount of money — down the road!

Now that you’ve read the manual you know that you should never operate a DE filter without adding the correct amount of DE through the skimmer, you need to replenish DE powder after backwashing and that once or twice a year you may need to put your filter elements (the ‘cloth’ covered things in your filter) through a process called acid washing (i.e. muriatic acid bath) to dislodge embedded microscopic particulates from their cloth covers…. right?!?

And for the record, you may NOT substitute cyanuric acid for muriatic acid, a chemical you will have to get from your local pool store or hardware store. Careful, though, if using product from a hardware store as it may have a much stronger concentration than its counterparts from the pool supply store!

Oh, and before we forget, many pool supply stores offer acid washing services with 48 hour turnaround times… in case you don’t feel like messing around with caustic chemicals in your backyard. :)

]]>
http://watertestingblog.com/2011/07/13/what-is-diatomaceous-earth/feed/ 0
Pool and Spa Water Filters http://watertestingblog.com/2008/05/29/pool-and-spa-water-filters/ http://watertestingblog.com/2008/05/29/pool-and-spa-water-filters/#respond Thu, 29 May 2008 10:47:32 +0000 http://watertestingblog.com/2008/05/29/pool-and-spa-water-filters/ Whether your pool/spa sits outside or under the protective cover of a roof, it still collects dust, debris and other nasty things which can ruin the fun of an afternoon swim or late night soak. Those same nasty items can ruin your health.

In an effort to prevent either of those tragedies, pool and spas come equipped with inline filtration systems designed to remove unwanted items from the water. Several different types of systems are commonly used:

  • Sand — Often found on aboveground pools and on commercial pools. Water passes through a body of sand and as it does so, larger particles get filtered out.
  • Diatomaceous Earth — Often found on inground pools of all sizes. Cloth covered fins or ‘fingers’ coated in a silt-like, white, material which looks very much like finely ground chalk filter out unwanted solids.
  • Cartridge — Often found in spas and on very small aboveground pools. Porous paper sheets filter out unwanted solids.

Cartridge Filters
Cartridge Filters
Sand Filters
Sand Filters
DE Filters
DE Filters
]]> http://watertestingblog.com/2008/05/29/pool-and-spa-water-filters/feed/ 0