Swimming Pool Copper/Silver Ionizer
Copper/Silver Ionizer

Back in the old days people used only one of two things to keep their pool water safe, clean and clear: Chlorine or Bromine. Nowadays people can choose from chlorine, bromine, ionizer, mineralizer, biguanide, peroxide, and salt systems — and each method requires special attention to specific water quality parameters.

Not knowing what to test for with each pool water sanitizing system could have disastrous results… which brings us to an email inquiry from ‘ShonShondra911′ who recently had a pool installed in her yard and had no idea what type of test kit to use:

"Our pool salesman suggested we install our pool with one of the ionizer systems that puts small amounts of copper in the water to help keep the pool from turning green and slimy (his words) and he said we would have to test for the levels once we got all the water in and the system started but he never said what levles to test. Do we just use the yellow and red kit you sell? Test strips you sell? Or do we need lab testing each time? Can you help???"

Do not panic, Shon. Do not panic. We can help you decide what type of pool water test kit should work best for your pool’s copper ionizer sanitizing system.

Copper Test Kit

Taylor K-1004 Test Kit

While you COULD invest in a traditional wet chemistry test kits such as the Taylor Copper Test Kit which tests for copper (.2ppm – 3.0ppm) in pool water and the Taylor K-1004 Troubleshooter Test Kit which tests for alkalinity, pH and other water parameters… a simpler, less expensive option exists.

Pool Check Copper 3 Way Test Kit
Pool Check Copper
3 Way Test Kit

The Pool Check brand of pool test strips manufactures a dip-n-read test strip product called the Pool Check Copper 3-Way which tests for copper, pH and total alkalinity — the three main water quality parameters you will want to keep an eye on most of the time.

This product boasts detection ranges of:

  1. Copper: 0, 0.2, 0.4, 0.6, 0.8, 1, 2 ppm
  2. Total Alkalinity: 0, 40, 80, 120, 180, 240, 360 ppm
  3. pH: 6, 6.4, 6.8, 7.2, 7.6, 8.2, 9

… and has a total test time of around one minute.

Additionally, this product requires no special chemicals, no multi-step instructions, no proprietary testing vessels (containers), and has a cost of around $11 for 50 tests!

So, unless you feel re-visiting your old high school chemistry days, we suggest you take a look at the Pool Check Copper 3-Way for your day-to-day pool water testing needs.