Today’s question came to us from ‘Malli’ who asked, “tell me simple method to find out the flourine percentage .Thanque”

For the sake of this article, and because it would make his/her inquiry make more sense, we will assume that Malli intended to ask for a method of testing for FLUORIDE levels in water.

Regretfully we have not heard of any ‘new’ methods a person can use to detect fluoride levels in drinking water since we last addressed this topic. Therefore we will continue to suggest using a meter such as the eXact Micro 7+ Water Testing Meter that uses Fluoride (SPADNS) Reagent to detect fluoride levels in water as low as 0.1 ppm and as high as 1.1 ppm.

One could also use the mail-in fluoride testing services of a company called National Testing Laboratories to determine how much, if any fluoride their drinking water contains.

So, Malli, once you determine if your water contains fluoride, next you will need to decide if you wish to remove or reduce that fluoride level… assuming you have fluoride in your water to begin with.

Removing/Reducing Fluoride Levels in Drinking Water?

When it comes to finding an effective means of reducing fluoride levels in drinking water, thus far our ‘research’ always points us down the same path… towards reverse osmosis water filters. The unit you see on the right, the Pentek RO-3500, has gone through testing and gotten certified by NSF/ANSI to Standard 58 for the reduction of Pentavalent Arsenic, Barium, Cadmium, Copper, Hexavalent & Trivalent Chromium, Cyst, Fluoride, Lead, Nitrate/Nitrite, Radium 226/228, Selenium, TDS and Turbidity.

Though definitely NOT the most expensive unit on the market, this filter has successfully passed third party testing, can produce nearly 8 gallons of crystal clear, filtered drinking water per day, and does so while reducing fluoride levels by more than 90%.

Moral of the story?

You will never know exactly how much fluoride, iron, copper, manganese, chlorine, salt, or other unwanted contaminants your water contains until you perform the appropriate tests on your water. Then, and only then, will you have the ability to make an educated decision regarding water treatment options.

Today’s inquiry came to us from ‘Mike L’ who asked about ways to soften his water without having to use a salt-based softening system.

I live in a small twin (3 bed/1.5 bath) that I lease. When we moved in, we noticed the water was particularly hard (10 GPG) and it was causing dry skin after showers and other issues. We don’t use a lot of water and we don’t have much space (1,300 sq. ft.). I also don’t much prefer the saltiness of “softened” water. My landlord gave me the OK to install a simple filtration system. I’m looking for something cheap, compact and simple. I don’t need 0gpg either, if I can lower down to a 3-4 GPG I would be happy.

Seems simple right? I was thinking maybe a 400GPD RO system but they all come with faucets which makes me think they may not be usable to throw in-line on the water system.

Do you know of anything (under $1,000) I can do to clean up my water and make it just a little softer?

Good news, Mike! Recent developments in the water softener industry include water softeners that do not use salt as the primary treating agent. Reasons for the salt-free water softeners range from States like California putting a ban on them for environmental reasons to people (like yourself) simply not enjoying the taste and/or texture of the water produced by salt-based water softeners.

Eagle A1000AS Anti-Scale Saltless Water Conditioner

To the left you will see an example of a water softener that uses a special filtration media to remove calcium and magnesium from source water instead of salt. The unit also comes equipped with a sediment filter, solid carbon block filter for VOC’s (volatile organic compounds) and an Ultrafiltration Filter good for removing particles as small as .01 microns.

Mike, you mentioned reverse osmosis as a possible option and based upon what you said you wanted from the water treatment system, we don’t think that will work out as well as you’d like, though we do agree that reverse osmosis water filter do an excellent job of filtering water.

Reverse osmosis units do not connect up as inline filters as neatly and tidily as it sounds like you’d prefer. They require drains for ‘waste water’ that gets rejected by the membranes and flushed out during backwashing. Also, reverse osmosis water filters require power which means running a power line to the unit.

The Eagle A1000AS Anti-Scale Saltless Water Conditioner uses no power, requires no drain, uses no salt or environmentally harmful chemicals, and supposedly will help to remove existing calcium and magnesium deposits already clogging water lines.

Moral of the story?

Mike, we suggest having your water tested by a certified laboratory in your area or having a mail order service such as National Testing Laboratories perform a thorough analysis of your water. From the sounds of things, your faucets could possibly have more than just calcium and/or magnesium coming out of them and you will not know for sure until you test.

We knew that this question would come along sooner or later. ‘Lisa’ wrote in and asked, “can my daughter use the arsenic water testing kit on juice? can you recommend any ideas for a science fair project?”

While we have no evidence to support the notion that Arsenic Quick Test Kits will function properly with juice as the test specimen rather than water, we have used the kits extensively and know that the color of the juice ought not affect the results since the test pads react with ‘arsenic gas’ liberated from the sample inside the reaction vessel and not the actual water sample.

Note: We contacted the makers of Arsenic Quick Test Kits about the effectiveness of their Arsenic Quick Test Kits with juice as samples and will most certainly share any definitive information we learn.

Getting back to the topic of using Arsenic Quick Test Kits, at first the process may sound a bit complex — but trust us when we say it really does not take a rocket scientist to perform the testing. Hence the reason why a number of people, including folks at the USEPA and other high profile government (as well as non-profit) agencies, have recommended this kit as a viable and useful field testing option when faced with situations where a water source may contain inorganic arsenic as a contaminant.

At this point you may find yourself asking, “Wait, didn’t you say the test liberated arsenic gas?”

Yes, Arsenic Quick Test Kits do liberate small amounts of arsenic gas in the test vessel but the amounts generated should not pose a problem as long as the testing takes place in an area with proper ventilation. In other words, open a window, test in the garage w/ the door open or perform your testing outdoors.

Arsenic Quick Test Kits do not require typical controlled laboratory environments in order to yield quality results.

What about the science projects?

So glad you asked! Depending on where you live, Lisa, and how many bodies of water you have access to for sampling purposes, you could have quite a few really cool science projects for your daughter to work on.

A company called Water Safe manufactures a test kit called the Science Fair Project Test Kit which gives young (or old!) experimenters the ability to test up to 10 bodies of water for the following important drinking water parameters:

Do other options exist for more testing? Of course they do… but the WaterSafe Science Fair Project Test Kit offers a good sampling (8 parameters for 10 bodies of water) of tests for a reasonable cost — around $80. If that option does not suit your budget, WaterSafe also makes the same kit in a smaller size that tests up to 4 bodies of water for the same water quality parameters for around $40.

Got bigger testing plans?

If you believe you will want to perform long-term testing and will need 25 to 50 tests per water quality parameter, SenSafe manufactures a par of kits called the Well Driller Standard and Well Driller Master test kits which both come with plenty of testing supplies to keep testing projects of longer duration well-stocked.

Today’s question comes from ‘MarquisMark’ who asked,

“My girl and me just bought a new place but the water well it sucks. Got white buildup and other colors of stuff building up in the sinks and the water kit we bought, that sensafe one on your site, says we got all sorts of problems like metals too. A friend says we need a filter and a softener but I don’t know if they make a all-in-one type filter softener thing… but my girl says we gotta do something, so can you help?”

Thank you for your question Marquis and it sounds to us like you and your girlfriend have a real mess on your hands when it comes to the quality of your water.

Question: Well water or city water?

If well water, then we suggest looking in the phone book for a certified well contractor and having them come out to look at the condition of your well.

If city water we suggest contacting your local water department and requesting the latest copy of their Consumer Confidence Report, an annually published document that discusses how good (or bad) a job the department did at keeping its water quality readings in line with Federal Guidelines.

In either case, certainly get your water tested by a qualified water testing laboratory before investing – and yes, we said investing – in a water filtration and/or water conditioner for your home. Otherwise you may run the risk of purchasing the incorrect unit for your specific water remediation requirements.

In other words you may buy the wrong tool for the job… and that could mean a whole lot of wasted money and continued water quality troubles.

Cost of combination water filter & water softener

Definitely not cheap, but if you have drinking water in desperate need of improvement then investing in a whole house water filter & water softener system such as the Whole House Filter and Anti-Scale Conditioner Combo made by Crystal Quest may make sense.

With pricing for the Whole House Filter and Anti-Scale Conditioner Combo (CQE-WH-02136) starting at around $2,900 you really, really, really want to make certain you 1) Need a water filter; 2) Need a water softener; 3) Know for sure that the unit will correct the specific water quality issues that you have.

Moral of the story?

Not all water treatment options will work in every application so before you plop down your hard earned money, get your water tested by a qualified drinking water testing laboratory. If you cannot locate a local laboratory we suggest you consider using the testing services of an accredited mail-in water testing laboratory such as National Testing Labs.

One of the most interestingly named water filters out there, KX Matrikx, also has a reputation for excellence and we get a number of people asking where they can acquire KX Matrikx filters for their water purification systems.

Below you will find a listing KX Matrikx replacement filters carried by Filter Water, a leading online retailer of water filters, replacement water filters and water test kits.

KX Matrikx CTO Carbon Filter	KX Matrikx 10-2 Carbon Filter	KX Matrikx VOC Carbon Filter 02-250-125-975
KX Matrikx +1 Carbon Filter	KX Matrikx +Pb1 06-250-125-975	KX Matrikx CTO-2 Carbon 20
KX Matrikx +Pb1 Carbon Filter 06-250-125-20	KX Matrikx +Pb1 06-425-200-20 20 inch Filter	Culligan Compatible Carbon Block 32-175-050-100

A recent study has found a possible link between increased risk of prostate cancer in areas where more women use specific types of birth control — but as usual other recent studies did not find the same correlation.

We feel the importance of the study lies more in how some experts believe people have become overly exposed to estrogen.

Rather than simply stating that the increased estrogen levels come directly from ingestion of birth control medications, the study implied that people re-ingested estrogen that had worked its way out of women on the pill via normal waste channels, wound its way through (or in some cases around) waste water treatment facilities, entered the environment, and finally gotten consumed or absorbed by plants and animals that people then ate as part of their everyday fare.

Removing estrogen from drinking water?

We wish we had better news on this topic, but we must sadly report that we have yet to hear definitively that any one type of water filtration unit does a good job of removing estrogen from drinking water — nor possibly a number of other pharmaceutical byproducts currently entering our water supply every day.

We have, however, seen that some companies tout reverse osmosis as an effective way to remove MANY of those pharmaceutical byproducts, but NOT all — and we would certainly suggest that anyone considering the purchase of a reverse osmosis for the purpose of removing pharmaceutical residuals review the specifications carefully before making an investment.

Moral of the story?

Experts tell us our water supply keeps getting tainted by new things, or possibly by things we could not test for until recently, and the majority of us just sit idly by and say, “Oh well. The government (or someone else) will take care of it.”

Listen folks: The contaminants already exist and just like with soooooo many other ‘newly detected risks’ the responsibility to safeguard one’s self and loved ones will fall squarely on the shoulders of the individual… until those in power agree which bill will do the most good w/o ruining careers of friends, family, etc.

All of us here at Water Testing Blog would love to know if folks in power and/or in big business already have water filtration units installed their homes and offices and/or have their water trucked in from suspected safe sources. How many, if any, will answer that question?

For more specifics on the study, take a look at this page ( Prostate Cancer May be Linked to Birth Control Pills in Water Supply ); one of several we found while doing a search on the topic.

Not too long ago many news outlets contained broadcasts and articles about the presence of BPA, a hormone-disrupting chemical, in plastics and how people, especially pregnant women, should avoid eating out of containers containing BPA.

Today we read an article about a study that found a link between the consumption of canned foods and elevated levels of BPA in humans. According to the study’s findings, people who ate canned soup regularly had much higher levels of BPA in their urine than people who ate soup made with fresh ingredients.

People who ate a serving of canned soup every day for five days had BPA levels of 20.8 micrograms per liter of urine, whereas people who instead ate fresh soup had levels of 1.1 micrograms per liter, according to the study. BPA is found in many canned foods — it is a byproduct of the chemicals used to prevent corrosion.

…

“We are concerned about the influence of [hormone-disrupting] chemicals on health in general, and BPA is one of them,” Michels told MyHealthNewsDaily.

The study is published online today (Nov. 22) in the Journal of the American Medical Association. ( source )

So there you have it, folks: A good, solid reason to support farmers in your area by purchasing your foods fresh from grocery stores that buy local.

As far as BPA in plastics goes, we will say only that plenty of companies now use BPA-free materials in their containers so the risk of ingesting BPA from plastic containers is one that most of us can easily avoid – if we choose our plastic containers carefully.

Replace older plastic containers

… with newer ones bearing the BPA-Free badge. Oh, and if you routinely use old margarine tubs, cool whip tubs or other plastic tubs (like we do!) you should swap them out for tubs manufactured more recently, too.

And don’t forget to properly recycle the plastic items you decide to get rid of! We don’t want them ending up in landfills where they could possibly leach their BPA content into the environment over time!

It appears as though even members of the water filter industry want to get in on the Black Friday and Cyber Monday madness. FilterWater.Com currently offers $5 off of purchases of $50 or more and $25 off of purchases of $500 or more.

While not massive discounts on their own, combine either offer with FilterWater.Com‘s offer of free shipping for orders over $99 and the savings really start to add up!

So, if you have previously waited to invest in water test kits, water filter systems or replacement water filters, you may want to start thinking about making that investment again real soon because the discounts will apparently disappear after 11/29/11 (tomorrow!).

One danger we all face when purchasing a water filter: It doesn’t remove all the things we want it to remove. Yep, this can definitely happen to people if they do not have a thorough water quality analysis performed prior to purchasing a water filter for their home or place of business.

Today’s question comes to us from someone in NYC (Brooklyn to be more precise) who has apparently installed a water filtration system in their home… but still has ‘floating white stuff’ in their water.

M. Elbaz wrote, “How can i check if water has copeds or bugs or parasytes? I use filter in Brooklyn ans still see white things floating around
Please advise asap”

Quite frankly, this question has a number of possible answers, but from what you have described, one of many situations may have resulted in the floating particulates you described:

1. You have installed a water filter with too high a porosity rating, meaning the contaminants you want to filter out have too small a size for your filter to remove them.

    

2. The installation of your water filtration system requires adjustment because some part of the unit is allowing unfiltered water to bypass the filtering process — or the actual filter itself has started to break down.

    

3. Since we don’t know what class of filter you have installed (i.e. undersink, countertop, whole house, etc.) we will just throw this one out there for the heck of it: Often when people install filters that will still allow water to pass though existing faucets they fail to replace the screens in their faucets.

   Studies have shown that screens in faucets, if left unchanged for too long, will tend to collect specific deposits of contaminants in contaminated water — and then potentially release those contaminants into the water stream at a later time.

    

4. Floating white particulates make us think more of mineral deposits than parasites, but it should still trigger an alarm that something isn’t quite right. Perhaps, and those kind of goes back to the last bullet point, the lines in your home post-filter have collected mineral deposits over the years and those now appear in your water?

As for your question regarding the possibility that your water contains parasites, bacteria, etc., contact a certified water testing laboratory in your area and have them perform a thorough analysis of your water.

Steer clear of water treatment companies offering ‘free in-home testing’. Why? Simple: For one, no in-home test kit we have ever found can provide the thoroughness of testing required if you suspect parasites or other unwanted biological contaminants exist in your water supply.

Besides… a person from a water treatment company going to your home has one goal in mind: to make commission off the sale of a (potentially useless or otherwise unqualified) water treatment system.

Need help finding a qualified water testing laboratory in your area? Take a look through the EPA’s listing of State Certified drinking water laboratories. The laboratories on this list have passed rigorous qualification programs designed to weed out labs whose testing programs lack what it takes to accurately and professionally analyze drinking water samples.

Does that mean at-home bacteria test kits such as the WaterWorks™ Bacteria Water Test Kit have no purpose? Nonsense! Periodic testing for coliform bacteria — especially for well owners since no one government agency checks the quality of their water on a regular basis — will always make sense.

Important factors to think about when it comes to deciding when and/or how often to test the quality of your water:

• For Well Owners: Changes in weather patterns (i.e. excessive rain, long periods without rain, flooding, etc.) can have adverse effects on the quality of water coming out of your well.

• For City/Municipal Water Customers: Anything can happen to the miles of underground piping between the water treatment facility and no one will ever investigate until people start to get sick.

Performing regular spot checks on your water’s quality may allow you to detect potential problems well in advance of anyone becoming ill.

“It’s your water, your health… and ultimately your LIFE!”

Today’s inquiry came from ‘Bill’ and it seems as though Bill has a bit of a bone to pick with fluoride in his drinking water and wants to do two things, both of which nearly bring tears to our eyes:

1. Bill wants to test the fluoride level in his water before it goes into his water filter. As awe have said time and time again, without a baseline scan of your water’s quality you will undoubtedly run the risk of selecting the incorrect tools for cleaning up your water.

2. Then, Bill wants to test the fluoride levels in the water after it leaves his water filter to make sure the filter did its job. Continual monitoring of one’s filtered water quality gives real-time performance data on one’s chosen water improvement device(s).

Enough of our words, though, and let’s here from Bill himself: “I am looking for a fluoride test–I am installing a filter to remove fluoride–and want to know what levelis presecn Please advise–the page on your website says to use the eXact Micro 7+ Water Testing Meter but the product description says nothing about it being used for fluoride”

None of us here at Water Testing Blog have control over the content posted on the sites of merchants who sell the eXact Micro 7+ water testing meter… but we can assure you that the meter does have the ability to test for fluoride in drinking water.

As a direct result of your inquiry, Bill, we checked on the meter manufacturer’s web site for the current version of the eXact Micro 7+ water testing meter manual and on page 19 of the document you will find instructions on how to use their meter to test fluoride levels in drinking water.

As of 8/17/11, the date contained in the manual’s file name, the eXact Micro 7+ detects levels of fluoride in water as low as 0.1 ppm and as high as 1.1 ppm. As with any test procedure, use of proper dilution techniques would allow for the quantification of higher fluoride levels if needed.

Keep in mind, though, that the basic eXact Micro 7+ kit does not come with the necessary fluoride reagent strips. You will find those, along with many other optional reagentstrips for testing a bunch of other water quality parameters listed on the eXact Micro 7+ ReagentStrip page.