Residents in a community on Long Island (NY) have something to celebrate these days… tap water with a heck of a lot less iron and a much clearer color.

It seems that after years of complaining and the outcry for action seen on one man’s Facebook page, local authorities in Malverne finally found a way to force Long Island American Water Company’s hand — by having samples of water pulled from random homes in the area and tested by an outside, independent water testing laboratory.

We will let the article tell you the rest…

The results are in!

In response to the overwhelming amount of complaints from residents about the brown water coming from their tap, the Malverne Civic Association (ar)ranged for a handful of homes to go under the microscope.

Water samples were taken from five houses located on Oak Street, Scarcliffe Drive, Walker Street, Rider Avenue, and Nassau Boulevard in Malverne and sent to an H2M, an independent lab in Melville for testing.

Earlier this month Bill Varley, president of Long Island American Water, the utility that provides water to homes in Malverne and surrounding areas, announced that the results were in. (Days later, the company also finally put its $7.5 million iron treatment facility in Malverne into service.)

As promised, Varley shared the results with the Civic, including Tom Grech, the Malverne man who was instrumental in rallying residents to speak out about the issue using a Facebook page he created called “I Love Malverne…but hate the brown water (From LI Water).”

Residents were mostly concerned with the levels of naturally-occurring iron in their tap water. While the Nassau Count Department of Health does not recognize iron has a health hazard it does set standards for aesthetic reasons, since the iron can turn the water brown and even stain laundry.

The Maximum Contaminant Level (MCL) for total iron in cold water states that it should be less than 1.50 mg/L. None of the samples taken from homes in the village came close to hitting this limit. The highest level, 1.15 mg/L, was taken from a kitchen faucet in a home on Walker Street.

The samples also fell within the acceptable water color standards. None of them met the criteria for being considered “discolored” or odorous, and were within the pH range of 7.5 to 8.5 units that the health department recommends.

As for oxidized iron levels, there were a couple of samples that came back higher than the standards, but these are guidelines set forth by Long Island American Water itself and not any health agency.

While some residents reported having “very brown water” two days after the plant when into service, Varley said that homeowners could see the water look worse before it gets better. This is the result of reverse air flow that got into the system when they put the plant on line and is only temporarily. The company has been flushing hydrants around the neighborhood to counteract this.

It appears that some residents are now starting to see the benefits of the plant, reporting noticeable improvements in the color of their water.

One resident, commenting on the Facebook page, wrote, “I have run several baths for my kids over the last few days and the water has been the clearest I have ever seen it.”

Another added, “Mine too – not totally clear, but much clearer than I have seen in years!” ( source )

There you have it. Concerned citizens just like you decided they wanted change and through their diligent efforts they got it. When it comes to the safety of your drinking water, you, too have a say and your opinion DOES matter — but only if you speak up and don’t take ‘no’ for an answer.

Testing for iron in drinking water

First of all, not every iron in drinking water test kit does the same job. Some only test for ‘free dissolved iron‘ while others test for ‘total iron‘. Clearly we suggest testing for total iron, but in some instances testing for only dissolved iron does actually make sense.

Filter Water: Test for Free Dissolved Iron
Test for Free Dissolved Iron

Test Products: Test for Total Iron
Test for Total Iron

Filter Water: Meter for Testing Total Iron
Meter for Testing Total Iron